Al/Ni含能多层膜在Al2O3陶瓷/不锈钢焊接中的应用

采用磁控溅射设备,生长AuSn合金做焊料层、Al/Ni含能多层膜做热量提供层,实现了不锈钢和Al_2O_3间的异质材料自蔓延高温扩散焊。利用SEM、XRD和DSC等测试手段表征AuSn合金和Al/Ni含能多层膜的微观形貌、相成分和放热量;用万能试验机测试焊接接头的力学性能。结果表明,AuSn合金的质量比基本达到80∶20,而多层膜的层状结构清晰,反应热达到1 239 J/g。焊接实验结果表明,仅使用AuSn焊料时,剪切强度仅为46 MPa,在增加Al/Ni含能多层膜后,其剪切强度可达90 MPa,强度提高了约一倍。焊接接头的界面显微形貌和相结构研究表明,剪切强度的增强主要是Al/Ni多层膜提供了额外能量使得界面处的反应剧烈,陶瓷金属化层与中间层的反应加剧,形成了新的反应生成物。     

Data fusion algorithm based on state and attribute parameter

Ａｑｕｅｓｔｉｏｎｔｈａｔｈａｓｂｅｅｎｃｏｎｃｅｒｎｅｄｆｏｒｍａｎｙｙｅａｒｓｉｎｔｈｅｍｕｌｔｉｔａｒｇｅｔｔｒａｃｋｉｎｇｆｉｅｌｄｉｓｈｏｗｔｏｒｅｄｕｃｅｔｈｅｃｏｍｐｕｔａｔｉｏｎａｌｃｏｍｐｌｅｘｉｔｙｏｆｄａｔａａｓｓｏｃｉａｔｉｏ...     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

三维PIV中透视成像的视点定位与透视平面的确定

对三维PIV中透视投影的视点定位与透视平面的确定技术作了深入的研究，提出了一种确定视点坐标与透视平面的方法，给出了相应的数学关系式，最后通过实验的方法对视点坐标与透视平面的确定技术进行了检验。     

三维角联锁结构复合材料等效弹性性能有限元分析

在复合材料承载时变形协调的前提下,采用CAD软件绘制三维织物单元体几何模型,然后导入结构分析有限元软件包,对工程中常用的带衬经三维角联锁结构复合材料的弹性性能进行分析,并将0°和90°方向弹性性能预测值及实验值与取向平均法预测值进行比较。结果表明,采用的有限元方法所得预测值及实验值与取向平均法预测值之间具有很好的一致性。     

水族箱自动加氧系统的设计

传统的水族箱在进行加氧时具有机械性,需要多次的人工开停操作,已不适应现代的生活方式。本文介绍了一种由TH-2型水氧传感器,51单片机,模数转换器及其外围电路组成的水族箱自动加氧系统,实验证明该系统具有优良的性能和简捷的操作,节省了人工和电耗。     

基于Solid-Works的齿轮参数化设计

由于Solid-Works2003及以前版本的软件，其标准件图库中没有绘制各种齿轮的功能，本文介绍了在Solid-Works中实现参数化齿轮三维造型的一种方法，应用此方法可以在Solid-Works环境下完成齿轮的参数化三维绘制。     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

Ca的掺入对复合氧化物LaFeO3和LaMnO3的结构及电性的影响

用柠檬酸法、固相法制备了替代的复合氧化物Ｌａ１－ｘＣａｘＦｅＯ３及Ｌａ１－ｘＣａｘＭｎＯ３。对样品进行了ＸＲＤ及导电能力测试。结果表明：Ｘ≤０．５，复合氧化物为单相的钙钛矿结构；Ｃａ的掺入，改善了ＬａＦｅＯ３导电性能，使其室温电阻率从６×１０＾４Ω·ｃｍ降低到１０Ω·ｃｍ左右；而对ＬａＭｎＯ３的影响不大，其室温电阻率在１０＾－１Ω·ｃｍ左右。     

浅谈Java 2D图象处理技术

本文介绍了Java 2D API的图象处理思想.通过以LookupOp查找表过滤器为例,分析了图象的即时模式模型,即对内存的缓冲区图象进行处理,再绘制到屏幕上的处理技术.同时介绍了利用Java 2D中提供的过滤器对图象数据的过滤操作.